User manual - Machine Automation Solution - V3R003
35 / 102
Figure - Steadyline
8.1 NTRIP server
NTRIP
is a RTK service in which the correction is transmitted through the Internet, using the available 3G or Wi-Fi
network.
Important
The system mode must be set to
Advanced
so that the GNSS option is made available.
Important
This configuration will only be available when selecting the GNSS models: NTRIP, OEM7
NTRIP or OEM617 NTRIP, which are available for AgrOn Ti10 equipment. RTK must be
enabled, otherwise an alert will be displayed on the operation screen
To access NTRIP support, proceed as follows:
1.
Press the
GNSS
option in the
Settings menu;
2.
In the
GNSS model
, select
NTRIP, OEM7 NTRIP
ou
OEM617 NTRIP
;
3.
Select the NTRIP option that has been enabled.
Figure - NTRIP
·
To find out the status of the NTRIP service, go to the
·
To enter the NTRIP server data, go to the
topic.
8.1.1 NTRIP status
NTRIP status
: indicates whether or not NTRIP is connected. If it is disconnected, it informs the reason.
To check the status of the NTRIP, proceed as follows:
1.
In
GNSS Model
select
NTRIP, OEM7 NTRIP or OEM617 NTRIP
;
2.
Select the
NTRIP
option that has been enable;
3.
Select the
NTRIP Status
option.
