User manual - Machine Automation Solution - V3R003
36 / 102
Figure - NTRIP Status
·
Status NTRIP
u
Connected;
u
Connected - intermittent corrections;
u
Disconnected;
u
Incorrect username or password;
u
Incorrect base (or too distant);
u
Missing GGA messages;
u
Not configured;
u
Internal error or no connection.
·
Base position (lat,long)
Indicates in which latitude and longitude position the NTRIP base is sending the corrections.
·
Timestamp correction
Time of the last correction received from the base.
·
GGA timestamp
Time of the last vehicle position reference sent to the base.
8.1.2 NTRIP Server
NTRIP server: where the server connection data is configured.
To enter the NTRIP data, proceed as follows:
1. In
GNSS
Model select
NTRIP, OEM7 NTRIP
or
OEM617 NTRIP
;
2. Select the used option called
NTRIP
;
3. Select the
NTRIP
Server option;
4. Enter the
User
and
Password
data;
5. Enter the
Address
and
Port
;
6. In
Stream
, the nearest correction points will be listed.Select the desired location and press
OK
.
