User manual - Machine Automation Solution - V3R003
18 / 102
Figure - Alerts - Solutions
The following alarm categories are issued by the display:
·
GNSS information;
·
Odometer information;
·
CAN information (connection to the drivers);
·
Power supply;
·
Anticide;
·
Speed limit;
·
Memory;
·
Planting monitor;
·
Auto steering;
·
Fertilization;
·
Seed controller;
·
Sprayer;
·
SIM Card;
·
CPU temperature;
·
Chat messages;
·
Routes.
Warning
Anti-lock alarms are issued when the temperature and/or memory reach critical levels. In this
situation, the used is informed of the required procedure. In case the message is ignored,
operation is suspended.
7.1.1.1 Alert descriptions
The displayʼs alert table is presented below:
Name
Summary
Description
Monitoring alert
Rule violated
A monitoring rule has been violated. Contact your supervision.
High temperature
High system
temparature
Operation suspended due to overheating. Turn off device, let it cool for a
few minutes, and then turn it on again. Contact technical support if the
problem persists.
Scale
Communication error
The system is unable to communicate with the weighing module. Ensure
that the cable is connected and has not been damaged.
Incompatible
Titanium database
Incompatible Titanium
database
Incorrect version of the Titanium database, which may cause strange
behavior and failure. If this occurs, please restore the factory settings to
create a correct version.
Virtual fence
Out of bounds
You are outside the operating area. Please return to the allowed area.
