25 / 88
en
Rev. 03 / 02.2021
AB3200
Commissioning
Connecting the device
1
Fig. 9: Power supply connection
1 Mains cable connection
Switching on the device
1
Fig. 10: Device switch
1 Device switch
[ON/OFF]
1 20 9/;\9 1500 2:00
PROG
T/°C
RCF
RPM
t/min
Fig. 11: Start screen
Personnel:
■
Authorized skilled personnel with special instruction
1.
Make sure the operating voltage is correct, as speci-
fied on the nameplate.
Connect the mains cable included in delivery to the device plug on the
device.
2.
Stick the other end in the socket.
Personnel:
■
Authorized skilled personnel with special instruction
1.
Switch the device on.
🡆
The control will start up. The following information is shown on the
display:
■
Device type
■
Software version and mains voltage
■
Rotor information about the last operated rotor type
The maximum permissible speed of the rotor is taken by the
system.
The maximum speed of the device is limited by the data stored
in the rotor code.
In order to be able to make use of the display function of the
relative centrifugal force, the centrifugation radius must be
input. It is not automatically taken from the rotor code.
■
Note regarding the opening of the device / For opened device:
Program no. 1 / last loaded program, the last loaded program
link.
2.
