Hettich ZENTRIMIX 380 R Скачать руководство пользователя страница 12

Страница: 12 / 88

Rev. 03 / 02.2021

AB3200

12 / 88

Safety information

Danger due to electrical
energy

Danger due to kinetic energy

Danger due to insufficient
maintenance or maintenance
not performed in a timely
manner

Safety information

The device and its associated components and assemblies

meet the currently valid safety standards individually and as

a whole and meet the CE directives of the European Union.
The device is safe if used as intended and observing the

descriptions and information given in this documentation.

WARNING

Warning of incorrect voltage on the device protection switch!

Pay attention to the correct operating voltage in order to
prevent damage to the device.

−

Only operate the device at the correct operating voltage.

−

Refer to the technical data and nameplate for the value
for the correct operating voltage.

−

If the operating voltage is too high, the overcurrent pro-
tection fuse in the device switch can trip and the device
electronics can be destroyed.

DANGER
Danger due to rotor moving with high kinetic energy!

There is a risk of injury if the lid is opened via the emergency
release during device operation.

−

Only open the device via the emergency release when
the device is switched off.

−

Before the emergency release, make sure that the
device rotor has stopped.

DANGER
Danger due to insufficient maintenance or maintenance not
performed in a timely manner!

There is a risk of collision inside the device due to insufficient
maintenance or maintenance not performed in a timely
manner.

−

Have maintenance done at the specified intervals.

−

Check the rotor for a firm fit before using the device.
Correctly tighten the fastening screw. If the rotor has
play, it must be replaced.

−

Check the device for visible damage or deficiencies
before use. If you discover deficiencies or damage, put
the device out of operation and immediately inform an
authorized service technician.

Содержание ZENTRIMIX 380 R

























































































Результаты поиска

Содержание ZENTRIMIX 380 R

Отзывы:

Похожие инструкции для ZENTRIMIX 380 R

Бренды по названию

Популярные бренды

Hettich ZENTRIMIX 380 R, Руководство по эксплуатации

Результаты поиска

Содержание ZENTRIMIX 380 R

Отзывы:

Похожие инструкции для ZENTRIMIX 380 R

Бренды по названию

Популярные бренды