39 / 88
en
Rev. 03 / 02.2021
AB3200
Operation
Fig. 17: Emergency release
(figure is an example)
1
Fig. 18: Device switch
1 Device switch
[ON/OFF]
Fig. 19: Loosening the fastening
screw of the rotor
3.
Insert the Allen key (included in delivery as an accessory) horizontally
into the emergency release opening on the front side and carefully
rotate by one-half turn in the clockwise direction until the lid can be
opened.
🡆
The lid releases and springs open slightly.
4.
Remove the Allen key from the opening.
5.
Completely open the lid.
If the left LED in the [STOP/OPEN] flashes after switching
the device on again, press the [STOP/OPEN] key until the
motor-driven lid lock assumes its home position again
(open).
6.9
Removing and installing the rotor
Personnel:
■
Authorized skilled personnel with special instruction
To remove the rotor, proceed as follows:
1.
Unlock and open the lid
Chapter 6.2 ‘Opening the lid’ on page 31.
2.
Switch off the device with the device switch.
3.
Hold the rotor firmly with one hand and loosen the fastening screw of
the rotor by multiple turns counterclockwise using the Allen key
included in delivery until you can remove the rotor (the fastening
screw cannot be removed).
4.
Remove the Allen key.
