360077-1/O
44
i.Series® - All Models
10.6
Unit Cooler Cover Removal and Installation
If unit cooler cover is not removed as detailed in this procedure the drain port may be damaged. Improper
drainage may result in excessive icing and refrigerator’s inability to maintain temperature.
Required tools:
►
5/16” socket wrench
►
Tool to push putty away from the drain hose
A
B
C
Drain line and hose.
Label Description
A
Unit cooler cover
B
Drain port
C
Drain hose
10.6.1
Remove the Unit Cooler Cover
WARNING
Disconnect the refrigerator from AC power when removing the unit cooler.
CAUTION
The condensate evaporator and water evaporation tray are hot.
1
Disconnect the refrigerator from AC power. Remove one battery from the monitoring system backup
battery holder.
2
Remove top drawer, basket, or shelf from the chamber.
3
On the back of the camber, peel putty back to expose drain hose (C).
4
Remove drain hose from unit cooler drain port (B).
a
Pull drain hose downward to separate from unit cooler.
b
Twist drain hose while pulling to assist in removal.
5
Push the drain hose (C) out through rear of chamber.
6
Remove the unit cooler cover.
a
Hold unit cooler cover in place to prevent it from dropping.
b
Use the socket wrench to remove four screws securing the unit cooler cover.
c
Carefully lower unit cooler cover to avoid damage to the fan wiring.
