Helmer (Version A) HB120(Versions A and B) Скачать руководство пользователя страница 80

Страница: 80 / 138

360077-1/O

Horizon Series™ - Blood Bank Models

16.9

Additional System Settings

16.9.1

Screen Contrast

The screen contrast can be changed for easier viewing.

NOTE

►

During an AC power failure, the screen backlight is not illuminated to conserve

backup battery power.

►

During an AC power failure, the screen contrast cannot be changed.

Change screen contrast:
1

On the HOME screen, press the third button from the left to make the text appear lighter.

On the HOME screen, press the second button from the left to make the text appear darker.

16.9.2

Date and Time

The Date Format setting controls the order in which the month (mm) and day (dd) are displayed.

►

Month is a 2-digit number (01-12)

►

Day is a 2-digit number (01-31)

►

Default date format is mm/dd/yyyy

The Clock Mode setting controls whether the time is displayed in a 12-hour or 24-hour format.

►

When using the 12-hour format, AM or PM must be specified

►

Default setting is 12-hour

Change date and time settings:
1

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight Set Date & Time. Press the

SELECT

button.

Press the

DOWN

buttons to select the date and time settings to change.

Press the

INC

DEC

buttons to change the setting.

Press the

BACK

button to return to the Edit Configuration screen, or press the

HOME

button to exit.

The new settings are saved.

16.9.3

Display Language

The Horizon Series monitoring system stores two languages. English is the default language. If a

different language is desired, it must be loaded from the flash memory card. If a flash memory card is

not included with the refrigerator, the languages may have been loaded to the Horizon Series monitoring
system prior to shipment.

To obtain a flash memory card to load an alternate language, contact Helmer Technical Service.

NOTE

Each time the refrigerator is powered on, the Horizon Series monitoring system display
language must be selected.

Set the display language on power-on:
1

Connect the refrigerator to AC power.

Install the monitoring system battery that is included in the accessory package.

►

The refrigerator powers on and the Horizon Series monitoring system will display the System
Options screen.

Press the

INC

DEC

buttons to select the desired language. Press the

SELECT

button.

Содержание (Version A) HB120(Versions A and B)











































































































































Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды

Helmer (Version A) HB120(Versions A and B), Руководство по обслуживанию

Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды