Helmer (Version A) HB120(Versions A and B) Скачать руководство пользователя страница 35

Страница: 35 / 138

360077-1/O

i.Series® - All Models

Set the display language on power-on:
1

Connect the refrigerator to AC power.

Install the monitoring system battery that is included in the accessory package.

►

The refrigerator powers on and the i.Center will display the System Options screen.

Press the

INC

DEC

buttons to select the desired language. Press the

SELECT

button.

Press the

HOME

button to return to the HOME screen.

If a temperature alarm sounds, press the

MUTE

button.

Change the display language:
1

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight System Options. Press the

SELECT

button.

Press the

DOWN

buttons to select Language. Press the

SELECT

button.

Press the

INC

DEC

buttons to select the desired language.

Press the

BACK

button to return to the System Options screen, or press the

HOME

button to exit.

The new settings are saved.

8.10.4

Temperature Units

Available options are Celsius (°C) or Fahrenheit (°F). The default temperature unit is Celsius.

Change temperature units:
1

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight System Options. Press the

SELECT

button.

Press the

DOWN

button to highlight Temperature Units.

Press the

INC

DEC

buttons to select the desired temperature units.

Press the

BACK

button to return to the Edit Configuration screen, or press the

HOME

button to exit.

The new setting is saved.

Содержание (Version A) HB120(Versions A and B)











































































































































Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды

Helmer (Version A) HB120(Versions A and B), Руководство по обслуживанию

Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды