Helmer (Version A) HB120(Versions A and B) Скачать руководство пользователя страница 110

Страница: 110 / 138

360077-1/O

109

Horizon Series™ - Laboratory, Pharmacy, and International Blood Bank Models

23.4

Move Slides and Brackets
Remove drawer slides
1

Using a screwdriver, remove front bracket retainers.

Tap front brackets upward to disengage standards.

Remove slides from standards.

Install drawer slides
1

Insert slides into standard at appropriate height.

Tap front brackets downward to engage standards.

Using a screwdriver, install front bracket retainers.

Remove shelf brackets
1

Using a screwdriver, remove front bracket retainers.

Tap front brackets upward to disengage standards.

Remove front brackets from standards.

Install shelf brackets
1

Insert front brackets into standard at appropriate height.

Tap front brackets downward to engage standards.

Using a screwdriver, install front bracket retainers.

23.5

Optional Adapter Kits for Medication Dispensing Locks

Contact Helmer Technical Service or your distributor for service documentation pertaining to medication
dispensing locks.

24 Settings

Through the Laboratory combined monitor and controller, current settings may be viewed and changed.

NOTICE

►

Control Sensor Offset and Hysteresis settings are factory-preset and should not be

changed unless directed by Helmer Technical Service.

►

Changing temperature settings affects operation of the refrigerator. Do not change

settings unless instructed by Helmer Technical Service.

Содержание (Version A) HB120(Versions A and B)











































































































































Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды

Helmer (Version A) HB120(Versions A and B), Руководство по обслуживанию

Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды