Helmer (Version A) HB120(Versions A and B) Скачать руководство пользователя страница 79

Страница: 79 / 138

360077-1/O

Horizon Series™ - Blood Bank Models

16.8.2

Power Failure Alarm Test

NOTE

►

During a power failure, the power failure alarm activates and the batteries provide

power to the monitoring system.

►

If AC power fails, the backup batteries will allow for continued temperature display.

►

If the backup batteries fail, the temperature is not displayed.

►

When power is restored, the monitoring system resumes data display.

Confirm the refrigerator is connected to AC power.

Ensure the monitoring system backup batteries are installed.

Change Power Failure Timeout setting to 0 minutes.

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight Alarm Setpoints. Press the

SELECT

button.

Press the

DOWN

button to highlight Power Failure Timeout.

Press the

DEC

button to change the setting to 0.

Disconnect the refrigerator from AC power. Power failure alarm will activate immediately.

Reconnect the refrigerator to AC power. Power failure alarm will clear and audible alarm will cease.

Change the Power Failure Timeout setting to the original setting.

16.8.3

Door Ajar Alarm Test
1

Change Door Ajar Timeout setting to 0 minutes:

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight Alarm Setpoints. Press the

SELECT

button.

Press the

DOWN

button to highlight Door Ajar Timeout.

Press the

DEC

button to change the setting to 0.

Press the

BACK

button to return to the Edit Configuration screen, or press the

HOME

button to

exit. New settings are saved.

Open the door. Door ajar alarm will activate immediately.

Close the door. Door ajar alarm will clear and audible alarm will cease.

Change the Door Ajar Timeout setting to the original setting.

Содержание (Version A) HB120(Versions A and B)











































































































































Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды

Helmer (Version A) HB120(Versions A and B), Руководство по обслуживанию

Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды