Helmer (Version A) HB120(Versions A and B) Скачать руководство пользователя страница 34

Страница: 34 / 138

360077-1/O

i.Series® - All Models

Test the alarm:
1

Ensure the monitoring system backup batteries are installed.

Remove one battery from the monitoring system backup battery holder.

If the no battery alarm activates, no further action is needed. Reinstall the battery.

If the no battery alarm does not activate, contact Helmer Technical Service.

NOTICE

When installing replacement batteries, use only batteries which meet the specifications

outlined in chapter

10.7

(Supplies).

8.10

Additional System Settings

8.10.1

Screen Contrast

The screen contrast can be changed for easier viewing.

NOTE

►

During an AC power failure, the screen backlight is not illuminated to conserve

backup battery power.

►

During an AC power failure, the screen contrast cannot be changed.

Change screen contrast:
1

On the HOME screen, press the third button from the left to make the text appear lighter.

On the HOME screen, press the second button from the left to make the text appear darker.

8.10.2

Date and Time

The Date Format setting controls the order in which the month (mm) and day (dd) are displayed.

►

Month is a 2-digit number (01-12)

►

Day is a 2-digit number (01-31)

►

Default date format is mm/dd/yyyy

The Clock Mode setting controls whether the time is displayed in a 12-hour or 24-hour format.

►

When using the 12-hour format, AM or PM must be specified

►

Default setting is 12-hour

Change date and time settings:
1

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight Set Date & Time. Press the

SELECT

button.

Press the

DOWN

buttons to select the date and time settings to change.

Press the

INC

DEC

buttons to change the setting.

Press the

BACK

button to return to the Edit Configuration screen, or press the

HOME

button to exit.

The new settings are saved.

8.10.3

Display Language

The i.Center monitoring system stores two languages. English is the default language. If a different

language is desired, it must be loaded from the flash memory card. If a flash memory card is not included

with the refrigerator, the languages may have been loaded to the i.Center prior to shipment.

To obtain a flash memory card to load an alternate language, contact Helmer Technical Service.

NOTE

Each time the refrigerator is powered on, the i.Center display language must be selected.

Содержание (Version A) HB120(Versions A and B)











































































































































Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды

Helmer (Version A) HB120(Versions A and B), Руководство по обслуживанию

Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды