Helmer (Version A) HB120(Versions A and B) Скачать руководство пользователя страница 30

Страница: 30 / 138

360077-1/O

i.Series® - All Models

Enter the password when prompted.

Press the

DOWN

button to highlight Alarm Setpoints. Press the

SELECT

button.

Press the

DOWN

button to highlight Door Ajar Timeout.

Press the

INC

DEC

buttons to change the setting.

Press the

BACK

button to return to the Edit Configuration screen, or press the

HOME

button to exit.

The new settings are saved.

8.8.7

Power Failure Alarm

The Power Failure Timeout specifies longest time the refrigerator can be without AC power before the

alarm activates. If the time elapsed since the last power failure is greater than or equal to this value, the
alarm activates.

►

Default delay setting is three minutes

►

Setting can be changed from 0 minutes to 60 minutes

Change the alarm delay:
1

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight Alarm Setpoints. Press the

SELECT

button.

Press the

DOWN

button to highlight Power Failure Timeout.

Press the

INC

DEC

buttons to change the setting.

Press the

BACK

button to return to the Edit Configuration screen, or press the

HOME

button to exit.

The new settings are saved.

8.8.8

Chart Paper Alarm

The default setting for the chart paper timer is Enabled. One sheet of chart paper records temperatures
continuously for seven days. The timer activates an alarm 6.5 days from when the timer is reset. The
timer period cannot be changed.

NOTE

►

Available options are Enabled, Disabled, and Reset.

►

Enabling the timer also resets the timer.

Change the setting:
1

Press the

MAIN

button.

Press the

DOWN

button to highlight Edit Configuration. Press the

SELECT

button.

Enter the password when prompted.

Press the

DOWN

button to highlight System Options. Press the

SELECT

button.

Press the

DOWN

button to highlight Chart Paper Timer.

Press the

INC

DEC

buttons to select Enabled, Disabled, or Reset.

Do one of the following:

►

If Enabled or Disabled is selected, press the

BACK

button to return to the System Options

screen, or press the

HOME

button to exit. The new setting is saved.

►

If Reset is selected:

Press the

DOWN

button.

Press the

PAPER-CHANGED

button. The System Options screen appears with the Chart

Paper Timer set to Enabled.

Press the

BACK

button to return to the System Options screen, or press the

HOME

button to exit.

The new setting is saved.

Содержание (Version A) HB120(Versions A and B)











































































































































Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды

Helmer (Version A) HB120(Versions A and B), Руководство по обслуживанию

Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды