Helmer (Version A) HB120(Versions A and B) Скачать руководство пользователя страница 111

Страница: 111 / 138

360077-1/O

110

Horizon Series™ - Laboratory, Pharmacy, and International Blood Bank Models

24.1

Monitor and Controller Interface

Label Description

Function

COOL lamp

Indicates the compressor is running.

Display

Displays real-time temperature information, setpoints, and alarms.

HIGH TEMP lamp

Indicates when the refrigerator is in a high temperature alarm condition.

Also indicates high alarm temperature setpoint is being changed.

LOW TEMP lamp

Indicates when the refrigerator is in a low temperature alarm condition.

Also indicates low alarm temperature setpoint is being changed.

DOOR ALARM lamp Indicates when the door is open.

UP ARROW button

Increases a temperature setting.

DOWN ARROW /

MUTE ALARM button

Decreases a temperature setting. Also mutes the audible alarm for five

minutes.

SEL button

Toggles between alarm monitor and control modes.

ALARM DISABLE

key switch

Disables all audible alarms. This switch does not affect alarm lamps or

signals sent through the remote alarm interface.

SET lamp

Indicates when temperature setpoint or alarm setpoint is being

changed.

SET button

Allows settings to be selected, prior to changing settings.

CONTROL lamp

Indicates when the reading from the control temperature probe is

displayed.

MONITOR lamp

Indicates when the display is showing temperature readings from

the chamber probe. Also indicates when alarm setpoints are being

changed.

LIGHT switch

Turns the chamber light on or off

NOTE

The Alarm Disable key switch disables all audible alarms. This switch does not affect
alarm lamps or signals sent through the remote alarm interface.

Содержание (Version A) HB120(Versions A and B)











































































































































Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды

Helmer (Version A) HB120(Versions A and B), Руководство по обслуживанию

Результаты поиска

Содержание (Version A) HB120(Versions A and B)

Отзывы:

Похожие инструкции для (Version A) HB120(Versions A and B)

Бренды по названию

Популярные бренды