360179-A/B
15
Installation & Configuration
2
Using a #2 Phillips screwdriver, connect remote alarm wires to appropriate terminals, according to
requirements for your alarm system.
3
Use a cable tie to relieve strain on alarm wires (if necessary).
Remote alarm terminals (circled)
6.5
Connect AC Power Cord and Ethernet Cable for Access Console
1
Confirm the
Compartmental Access Refrigerator is at room temperature.
2
Connect the Access Console AC power cord to the blue receptacle on the back of the Access
Console.
►
Insert plug into receptacle
►
Turn plug 1/4 turn to the right, plug will lock in place
3
Connect the Access Console Ethernet cable to the (LAN1) RJ-45 Ethernet port on the back of the
Access Console.
Access Console RJ-45 Ethernet port and Access Console AC power receptacle
NOTE
Spare electronic components are stored inside the Compartmental Access Refrigerator
cover. Ensure cover is carefully set aside while connecting cables.
4
Using a #2 Phillips screwdriver, remove the cover from the top of the Compartmental Access
Refrigerator.
