HBK DSE, Руководство по эксплуатации

Страница: 66 / 204

DSE
WEB INTERFACE
64
values that are within the tolerance before the end of the post-trigger delay will be
included in addition to the measurement time.
Correction factor: You can use this function to make a correction between the static
adjustment of the scale and the dynamic result. Each valid trigger result is multiplied by
the correction factor.
7.8 Filler
Choose Filler as the Application Mode in order to enter the required parameters.
Fine flow
Coarse flow
Lockout
Phase
Start Tare
Coarse flow
Fine flow
Residual flow and validation
Emptying
Coarse flow
cutoff point
Fine flow
cutoff point
Target
weight
1
2 3
4
Fine flow lockout time
2 3 4
Fig. 7.17 Sequence of a filling process (example)
Fig. 7.17 shows a typical sequence of a filling process. Below the graph showing the
measurement or simulation, the individual phases are color-coded and the duration of
the coarse and fine flows is marked in blue.
You must specify the parameters marked with an asterisk as a minimum. All other
parameters are optional, and entering 0 usually disables the parameter. One exception
is the filling time, for which 0 signifies an unlimited filling time.