Haulotte Group HTL 3210, Руководство оператора

Страница: 198 / 248

198 2420344510 E 11.11 AUS
Telescopic handlers
H
- Lubrication and maintenance
8.7 - HYDRAULIC CIRCUIT
8.8 - AIR-CONDITIONING (OPTION)
Cold weather use :
In order to guarantee the correct operation and for operational efficiency of the air conditioning
system it is advisable to turn the compressor on once a week, even for a short period of time,
so as to ensure that internal moving parts are lubricated.
Warm up the engine before you turn on the compressor, this the heat produced by the engine
to turn the liquid coolant accumulated in the lower part of the compressor circuit to turn into
gas. Liquid coolant could damage the compressor.
8.9 - FLY JIB 2,5 M(8 FT2 IN), 1,2 WITH HYDRAULIC WINCH (OPTION) - FLY JIB 4 M(13
FT1 IN), 0,6 WITH HYDRAULIC WINCH (OPTION)
• Regularly check that the bolts and connections are correctly tightened (Tightening torques : 3,5
daN.m(25,8 lbf.ft) ).
• Regularly check the condition of the hydraulic hoses.
• Regulary check that the winch nuts are tightened correctly.
8.10 - WINCH SUPPORT- 1,2 WITH HYDRAULIC WINCH (OPTION) - WINCH SUPPORT-
2,4 WITH HYDRAULIC WINCH (OPTION)
• Regularly check that the bolts and connections are correctly tightened (Tightening torques : 3,5
daN.m(25,8 lbf.ft) ).
• Regularly check the condition of the hydraulic hoses.
• Regulary check that the winch nuts are tightened correctly.
• Check the oil level :
• Park the machine on a horizontal surface.
• Stow the machine : With the stabilisers raised as far as
possible, the fork carriage lowered as far as possible, the
boom retracted, the cylinders retracted.
• The level must be situated between the two marks, as
indicated in the photo/picture opposite. Top up as
necessary via the filler.