Haulotte Group HTL 3210, Руководство оператора

Страница: 71 / 248

71
2420344510 E 11.11 AUS
Telescopic handlers
D
- Operation
3 - Road operation
• Preparation :
• Remove any large amounts of dirt from the machine.
• Check the lights and the mirrors, and adjust them if necessary.
• Follow the recommendation in force in the country of use (Registration plate, jacket, warning triangle,
first-aid kit, chocks…).
• Lower the boom. The front edge of the attachment should be approximately 0,30 m(1 ft0 in) to 0,40
m(1 ft4 in) above the ground.
• Tilt the attachment back completely.
• Place a protective cover over the front edge of the bucket ; remove the carriage forks.
• Raise the stabilisers.
• If the rear wheels are not in line with the chassis, move them back slowly to a neutral position.
• Actuate the road switch P215.
• Empty the bucket (If equipped).
• The machine is now ready for road operation.
N.B. -:-Ensure that you follow all local, regional and national traffic regulations.