Haulotte Group HTL 3210, Руководство оператора

Страница: 199 / 248

199
2420344510 E 11.11 AUS
Telescopic handlers
H
- Lubrication and maintenance
9 - Every 24 h hours of operation
9.1 - SIDE-SHIFT FORK CARRIAGE GREASE POINT (OPTION)
Before carrying out any operations on the fork carriage, it is essential to :
• Disengage all the drives.
• Operate the controls until the pressure has dissipated.
• Set the fork carriage on the ground.
• Stop the engine (if necessary let the engine cool down).
• Disconnect the hydraulic hoses.
To ensure the fork carriage works properly, lubricate the plates ( 1 ) holding the clamps for the
fixed section every 24 h working.
Never carry out lubrication, maintenance and adjustment operations while the machine is switched on.
Escaping liquid can be under enough pressure to penetrate under the skin, causing serious injury. To
avoid any risk of accident, eliminate the pressure before disconnecting the hydraulic hoses. Before
repressurising the system, ensure that all the connections are correctly tightened.
Hydraulic liquid can get very hot when operating, do not carry out any operations which may cause a burn.
Wear gloves and goggles to protect yourself from fluid splashes.
Keep away from moving parts.