Haulotte Group HTL 3210, Руководство оператора

Страница: 197 / 248

197
2420344510 E 11.11 AUS
Telescopic handlers
H
- Lubrication and maintenance
• Clean the primary air filter's filter cartridge :
8.6 - INTERNAL COMBUSTION ENGINE
• Check the oil level :
• Open the motor canopy, remove the oil dip stick; the level must be situated between the two min. and
max. marks.
• Top up as necessary via the filler.
• Check the belt tension :
• Correct belt tension is essential to ensure that the alternator, the diesel pump and the water pump
work properly and for the service life of the belts themselves.
• A belt in poor condition must be replaced immediately.
• Remove the cover :
• Pull the trigger situated on the cover ( 1 ).
• Locate and note the angular position of the cover which
should be identical upon reassembly.
• Turn the cover to the right ( 2 ).
• Pull the cover to remove it.
• Turn and pull the outer cartridge.
• Clean the filter cartridge (replace it, at the latest, after
every 1000 h of operation or once a year).
• Blow with dry compressed air (with a maximum pressure
of 5 bar(72,5 psi)) from the inside of the filter, outwards or
• Unclog by tapping (Only in the event of an emergency). In
this case, do not damage the cartridge, or
• Wash it in accordance with the manufacturer's guidelines.
• Check that neither the cartridge filter paper (translucent
paper) nor the seal are damaged. Replace it/them if
necessary.
• Replace the filter cartridge.
• Refit the cover, checking that the dust evacuation valve is
directed downwards.
Check the state of the sealing ring before reassembling the cartridges. Check the state of the filter element
with a light source placed inside the cartridge. Change the cartridge if a hole is detected (by a light ray).
Never clean the cartridge by hitting it against a hard surface or by using hot flammable liquid.
For the following operations, park the machine on a horizontal surface and turn off the engine.