Haulotte Group HTL 3210, Руководство оператора

Страница: 196 / 248

196 2420344510 E 11.11 AUS
Telescopic handlers
H
- Lubrication and maintenance
8.3 - DIESEL CIRCUIT
• To prevent condensation from forming, top up the reservoir at the end of every working day (Capacity
: 120 l(31,6 gal US)).
8.4 - COOLING SYSTEM
• Check the coolant level :
• When the engine is cool, the liquid level must be situated between the min. and max. marks on the
expansion bottle.
• Open the radiator and top up with fluid as necessary.
• Only refill with SHELL ANTIFREEZE -38 °C(-36,4 °F) coolant.
• Check the state of the hoses and that the collars are secured.
8.5 - AIR FILTER (SYSTEM)
• Empty the dust filter :
N.B. -:-Filter clogging check : Clogging is constantly being monitored via a sensor situated on the filter
body. Visually inspect the state of the sensor. If red marking is visible : Clean or replace the filter element
even if the cleaning frequency indicated above has not been reached. Clean the inside of the box.
• Drain any condensate and clean the diesel pre-filter.
• To access the diesel pre-filter, open the engine cover. The
pre-filter is located under the diesel filter
• Drain water and dirt by removing the purge screw situated
under the pre-filter.
• Refit and tighten the purge screw.
Do not remove the filling cap when the engine is hot. DANGER OF BURNS! Loosen the cap to the first
notch and let it depressurize, then unscrew the cap completely.
• Empty the dust evacutation valve ( 1 ) by pressing on the
evacuation slot in the direction of the arrow.
• Clean the evacuation slot.
• Clean away any remaining dust by pressing the upper part
of the valve.