Haulotte Group HTL 3210, Руководство оператора

Страница: 207 / 248

207
2420344510 E 11.11 AUS
Telescopic handlers
H
- Lubrication and maintenance
12 - Every 250 h hours of operation
12.1 - COOLING SYSTEM
• Clean the radiator slats.
• Clean with a pressurized jet of water or air.
12.2 - TRAVEL AXLES
• Perform the first drainage operation on the front and rear axles and the epicycloidal reducers after the
first 250 hours of operation and then every 1500 h ( Section H 17.1 -Travel axles).
N.B. -:-Level check every 500 h ( Section H 15.4 -Travel axles).
12.3 - OPERATING BATTERY
Battery check :
• Perform the machine shut-down procedure.
• Open the engine cover.
• Wear safety goggles and visually inspect the battery. Check that the terminals are not corroded.
Replace the battery if its case is cracked, distorted or damaged.
• Close and secure the battery access cover (under the cab).
12.4 - AIR-CONDITIONING (OPTION)
Do not remove the filling cap when the engine is hot. DANGER OF BURNS! Loosen the cap to the first
notch and let it depressurize, then unscrew the cap completely.
Only clean with water when the engine has cooled down.
• Check the tension on the compressor driving belt : belt
tension 50 kg(110,23 lb).
• Replace the internal and external air filters as necessary.
The system becomes less efficient when the charge gas is lost. If the air conditioning unit does not work
properly, have a qualified and properly equipped person examine it.
All repairs must be carried out by a qualified and authorised person.