Haulotte Group HTL 3210, Руководство оператора

Страница: 76 / 248

76 2420344510 E 11.11 AUS
Telescopic handlers
E
- Attachments
3 - Telehandler/Attachment/Fork capacities
Before installing the attachment, check that it is approved and that the telehandler is equipped with the
relevant capacity chart.
Attachment manufacturer's plate
Load capacity chart
N.B. -:-The attachment number located on the manufacturer's plate must correspond to the attachment
number which appears on the load chart.
To determine the maximum capacity of the telehandler and the attachment, use the smallest of the
capacities as determined by the capacity stamped on the attachment or the lifting position on the load
chart..
The forks must be used in matched pairs.
Never use an accessory without having checked the HAULOTTE® accessory load capacity chart installed
on the telehandler. Failure to install the relevant HAULOTTE® supplied capacity chart could cause an
accident resulting in death or serious injury.