Haulotte Group HTL 3210, Руководство оператора

Страница: 69 / 248

69
2420344510 E 11.11 AUS
Telescopic handlers
D
- Operation
2.3 - TRANSPORTING THE LOAD
2.3.1 - For operation with non-suspended load
Once the load is engaged on the forks and leaning against the fork carriage, tilt the load
backwards to place it in the travel position. Travel as specified
Section A - Safety
precautions, Section E - Attachments.
2.3.2 - For operation with suspended load
Travel in accordance with safety rules specified Section A - Safety precautions,
Section E - Attachments
• Ensure the boom is fully retracted.
• Never raise the load more than 300 mm (11.8 in) above the ground or the boom more than 30°.
• The combination of sideways movement and the load could cause the machine to tip over.
• The guide persons must remain in constant communication (verbal or hand) and be in visual contact
with the operator at all times.
• Never place the guide persons between the suspended load and the telehandler.
• Only transport the load at walking speed (0.4 m/s) or less.
2.4 - DUMPING PROCEDURE
• Position the machine in the best location for lifting or placing the load.
• Actuate the parking/service brake and shift the gear control lever to neutral.
• Place the boom/attachment at less than 30 °.
• Check the level gauge to determine if the machine must be levelling and to do it with the
switch ( P200 ) (For HTL3510 only).
The machine is designed to allow movement of the main chassis 9 ° forward and backwards
(For HTL3510 only).
Never raise the boom/attachment more than 1.2 m(3 ft11 in) above the ground unless the machine is
levelled. The combination of sideways movement and the load could cause the machine to tip over.