Haulotte Group HTL 3210, Руководство оператора

Страница: 221 / 248

221
2420344510 E 11.11 AUS
Telescopic handlers
H
- Lubrication and maintenance
• Actuate the equipment controls in both directions for approx. five minutes (without reaching the
cylinder at stops 2).
• Place the machine in road position.
Refer to the Lubricants and equivalents table for the type of
oil used.
17.5 - AIR-CONDITIONING (OPTION)
• Cleaning of condenser and evaporator coils.
• Cleaning of condenser water outlets.
• Recovery of coolant in order to replace the filter-drier.
• Top up with coolant and check of thermostatic regulation and pressure switches.
17.6 - TOOTHLESS BUCKET (OPTION)
17.7 - TOOTHED BUCKET (OPTION)
• The level must be as indicated in the photo/picture
opposite. Top up as necessary via the filler.
Maintenance and repair work on the air conditioning must be carried out by a qualified and authorised
person.
Any top up on the circuit must be carried out by a qualified and authorised person.
Never open the circuit as this would cause a loss of coolant. The cooling circuit contains a gas which,
under given circumstances, may present some risks. This gas, i.e. the R-134a coolant, is colourless and
odourless and heavier than air. It is a stable product at normal temperature.. The compressor is fitted with
a gauge to check the oil level : Never unscrew this lid, as this would discharge the system. The oil level is
only checked when the oil is changed.
The bucket must be replaced every 2000 h or every 3.
The bucket must be replaced by a qualified, authorised person. Contact HAULOTTE Services®.
The bucket must be replaced every 2000 h or every 3.
The bucket must be replaced by a qualified, authorised person. Contact HAULOTTE Services®.