hatch comfort TAURAUS C1, Руководство пользователя

Страница: 40 / 68

Doc -030 Hatch comfort C1 User manual
Revised on 15/06/2021
Category
Light intensity depending on filament direction
Vertical Horizontal
Light intensity
Low mode
about 7,500 ㏓
High mode
about 24,000 ㏓
Illumination
range
X 130 ㎜ 170 ㎜
Y 70 ㎜ 45 ㎜
Remark) The light intensity shown is based on the distance of 700mm from the light source to an object.
Remark) The illumination range may vary according to the direction of the lamp filament
.
NOTE
By default, the filament direction of the lamp is set vertically.
If the direction is adjusted horizontally, the illumination range gets smaller and
the light intensity becomes stronger.
8.10.5 Adjustment of light intensity in 3 steps (Option)
▶ Press switch on the dentist control panel to turn on the operating light.
Press it again to turn off the operating light.
▶ While the light is ON, press switch until sounding of an alarm and release it to
increase the light intensity (in the sequence of L -> M -> H).
▶ Adjust the filament direction of the lamp with ‘Filament direction adjustment knob’ .
by loosening the knob and turning it along with the guide rail to rotate the lamp.
After controlling the direction of the lamp, tighten the knob.
Depending on the degree of rotation, illumination range and intensity change.
Category
Light intensity depending on filament direction
Vertical Horizontal
Light intensity
Low about 7,500 ㏓
Middle about 19,000 ㏓
High about 24,000 ㏓
Illumination
range
X 130 ㎜ 170 ㎜
Y 70 ㎜ 45 ㎜
Remark) The light intensity shown is based on the distance of 700mm from the light source to an object.
Remark) The illumination range may vary according to the direction of the lamp filament .
NOTE
By default, the filament direction of the lamp is set vertically.
If the direction is adjusted horizontally, the illumination range becomes smaller.