Hanwha Techwin WISENET TRM-810S-1TB, Руководство пользователя

Страница: 6 / 83

6_ live
live
4. After setting the date/time settings in the < date/time >
screen, click on the < finish > button to launch the setting
completion window.
5. In the setting completion window, click on the < ok > button
to finish camera setting and launch the camera registration
screen.
6. Cameras connected to the PoE port are automatically
registered and displayed in the camera registration list.
Select the cameras to be registered from the list of cameras,
and click the < register > button.
`
The camera may not be shown in the list if there is no response from
the camera. You can re-import the list by pressing the < >
button.
7. When camera registration is finished, the frame rate of the
set recording profile is displayed. After you click the
< manual Setup > button, you can modify the frame rate
value.
M
`
The recording settings are only applied to initialized cameras.
Setting up the network
Each NVR product supports a different number of network ports. If a product supports two or more, then each
network port will provide the following features.
• Camera: Can be used as a port for connecting a camera. If you connect a camera, then the camera video will
be transmitted.
M
`
If a UTP cable is used for connection, (UTP) is displayed; if a fiber optic cable, (Optic).
• Viewer: Can be used as a port transmitting video to the web viewer. If you access the network information on
your browser, then you can remotely monitor video in your web viewer.
• All: Can be used as a shared port for the camera and web viewer connection.
• Wi-Fi : Port to connect to external Wi-Fi. Wi-Fi port is used for backup.
- IP type: Allows you to select the type of network access.
- IP address, subnet mask, gateway, DNS
`
Static: IP address, subnet mask, gateway, and DNS can be directly entered.
`
DHCP: IP address, subnet mask, gateway, and DNS can be automatically set.
`
PPPoE: IP address, subnet mask, gateway, and DNS can be automatically set.
- User ID, password: To set the access mode to PPPoE, enter the " user id " and " password " registered to
PPPoE.
M
`
If the LAN cable is not connected to the port, the setting button will not be activated for use. Check the LAN cable
connection. (But in case of a PoE product, Network 1 is activated.)
`
The built-in DHCP Server in NVR will turn on automatically at stage 3. At this stage, using the existing DHCP server in the
same network may cause a problem, as two DHCP servers would be simultaneously operating.
`
A product with multiple network ports cannot use a single bandwidth for all of them.
example)
- Port 1: 192.168.100.199 / Port 2: 192.168.100.198 (X)
- Port 1: 192.168.100.199 / Port 2: 192.168.101.198 (O)
Setting the Switch mode
Set the camera registration method. This function is only available for products with PoE support.
For products with PoE support, see “ nvr products supporting each feature ”. (Page 4)
• PnP Mode : Camera connected to the PoE port of the product will be registered automatically on each
channel in the order of the port number.
This works only when camera is in factory reset state.
• Manual Setup Mode : Automatically scans and registers camera connected to the product’s PoE and camera
with separate switch.