Hanwha Techwin Wisenet PRN-6400DB4, Руководство пользователя

Страница: 74 / 125

74_
setup
setup
p2p
This function is only available for products that support P2P. For products that support P2P function, see page 4
“
products supporting each feature
” of the Product Specification Manual.
You can connect the recorder to Wisenet Mobile for easy use when using P2P service.
Setup > network > p2p
●
Enable P2P : Select check box if you want to use P2P service.
●
QR Code : Scan QR code by mobile device.
to run the p2p service
1.
Click <
enable p2p
> to test the connection to see if the current recorder can be connected remotely.
2. When the connection is successful, search for Wisenet Mobile from the smart phone, and then install and run
it.
￭
When " Add a device > QR code ” is selected, the Recorder QR code can be scanned.
3.
When the QR code is scanned, the UID that can be seen in recorder is automatically opened in the mobile
viewer, and the mobile viewer can be used right away when the recorder ID and password are entered.
4. After this, it automatically connects to Recorder and can be monitored easily with a smart phone when
running Wisenet mobile app saved in the smart phone.
￭
P2P service period expires in 3 years. If you want to extend it after expiration, contact your vendor.
Setting the SyStem
You can set the date, language, authority, etc. displayed when using the system, and query system information or log
information.
Date/time/Language
You can check and setup the current Date/Time and time related properties, as well as the language used for the
interface on the screen.
Setup > System > Date/time/Language
●
Date : Sets the date and its format that will appear on the screen.
●
Time : Sets the time and its format that will appear on the screen.
●
Time zone : Sets the time zone of your area based on the Greenwich Mean Time (GMT).
￭
GMT (Greenwich Mean Time) is standard World Time and the basis of world time zone.
●
Time sync : Specify the use of synchronization with the time server.
Click the <
Setup > button to display time synchronization setup screen.
If you enable < Synchronize with ntp server >, the current time of the recorder is synchronized by the server
specified in < ntp server address >, and the time information cannot be manually changed.
– Synchronize with NTP server : Specify the use of synchronization with the time server.
– NTP server address : Enter an IP or URL address of the time server.
– Last sync : Displays the most recent synchronization time from the selected time server.
– Enable as NTP server : If you select <
enable >, this recorder will act as a time server for another recorder or
network camera.
●
DST : Set up Daylight Saving Time with its period to make the time earlier than the GMT of its time zone by 1
hour during the set period.
●
Language : Select your language. Sets the language for the interface.
￭
Depending on the location of the product release, the language and standard time setup may vary.