64_
setup
setup
Screen position setup
Some monitors many not display information (camera name, icon, time information, etc.) about the Recording,
depending on the condition. Then, you can change the display position of the data.
1.
From the monitor setup menu, select <
Screen position setup
>.
2.
Using < > button to adjust the screen that is cut off.
3.
Click <
oK
>.
■
This product only supports 30Hz at 4K resolution.
text
You can set the POS device setting to send text information and text event information.
Device Settings
You can make detailed settings for the POS device connected to the recorder.
Setup > Device > text > Device
●
Device : Displays the text device name registered by the user.
●
Enable : Specifies whether to enable text device.
●
Channel : Select a channel to add a device from a channel table.
●
Port : Display a port number that is set.
●
Encoding type : Select an encoding type to use from a list.
■
Epson, Wincor Nixdorf, Axiohom, Radiant System, IBM POS device, and ANPR protocols are supported.
■
POS device connected to Recorder uses TCP/IP communication protocol.
Содержание Wisenet PRN-6400DB4
Страница 1: ...NETWORKVIDEO RECORDER User Manual Wisenet NVR...
Страница 125: ......