HANGCHA XF Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 136 / 142

132
Warning
If the OPS is activated by abnormal operation when a forklift truck is travelling in a
slope, the power supply will be cut off which leads to the slipping on a slope. To
avoid this kind of accident, the driver must operate the truck in a proper position.
3. Working Device Protection
If the driver leaves the seat or unfastens the seatbelt (if seat pressure switch is
applied) over 3 seconds in the process of handling, the buzzer will alarm and the
neutral indicator flashes and OPS lights are on. Operation of handling stops
automatically. If the driver returns and sits correctly, the handling can be
continued.
Caution
For trucks mounted with se
at applied with the seat pressure switch, it‘s required
that the driver sits correctly and then put the buckle of the seatbelt into the
receptacle. Note if the sequence is not followed, the truck will not start. Before
unlocking the working device, put the tilting lever and the attachment lever back to
the original position.
Abnormity of OPS Controller
If it happens to encounter the following situations, please park the forklift truck in a
safe place and contact the local agency of Hangcha forklift for inspection.
a) Shift the gear switch to first gear of forward or reverse, but the neutral indicator
light flashes when ready to start.
b)
The buzzer keeps alarming when the parking brake is already applied.
c)
The neutral indicator light keeps flashing when the gear switch is in the neutral
position.
d)
When the driver leaves the seat or unfastens the seatbelt (if seat pressure
switch is applied) over 3 seconds in the process of handling, the buzzer fails to
alarm and OPS light is not on.
e)
When the driver returns and sits correctly, the buzzer keeps alarming and the
OPS light keeps on.
Caution
There is no ― ‖ OPS light on the instrument for some truck models.