HANGCHA XF Series Скачать руководство пользователя

Страница: 125 / 142

121

Pull buckle belt downward with left hand,

pull out the lock buckle with fore finger,

middle finger and third finger in right hand,

and push up to touch cylinder at the same

time.

Keep the buckle belt tensioning and keep

the lock buckle out, revolve restraint

downward with right hand until touch

cylinder.

e. Keep tension with left hand, hold

restraint with right hand, loosen lock

buckle, and rotate restraint several times

until it cannot be moved.

f. Turn downward until touch cylinder.

11. Notice during usage
(1)

When charging LPG assembly, first open inlet shutoff valve, close outlet shutoff valve, when

charge is done, close inlet shutoff valve.

(2)

When take assembly to the truck, it should be fixed and the arrow should point upward, and inlet

shutoff valve closed. Connecting inlet connector with assembly outlet port, and then revolve to
tighten, open outlet shutoff valve, make sure there are no leaks, and convenient to use.

(3)

It must check the cylinder assembly whether leak or not per charging and fixing it on truck.

(4)

Prevent dust from entering into the inlet, and revolve dustproof cover after filling LPG out to

protect the airproof of check valve

(5)

It is forbidden to change the pressure of safety valve.

(6) Call the qualified unit to check and maintain, do not repair by self. And keep apart the abnormal

cylinder.

(7) This assembly has 2 ways to fill LPG, one is volume and the other is weight. Weight: make sure

the cylinder stand vertically when filling LPG. Volume: make sure the cylinder lay horizontally
when filling LPG, and let the direction mark up.

(8) Please obey the

gas cylinder safe supervise rule

awarded by the State Bureau of Quality and

Technical Supervision when charging ,transporting, depositing ,using and inspecting.

(9) When fixing and disassembling cylinder please do it lightly, it is forbidden to hit other object.

Keep cylinder assembly intact and do not disassemble, adjust and replace components.

117

Содержание XF Series















































































































































Результаты поиска

Содержание XF Series

Отзывы:

Похожие инструкции для XF Series

Бренды по названию

Популярные бренды

HANGCHA XF Series, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание XF Series

Отзывы:

Похожие инструкции для XF Series

Бренды по названию

Популярные бренды