HANGCHA XF Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 30 / 142

26
4.0t~5.5t W35
、
W57
、
W23
、
W68 Forklift
Truck:
symbol
○
45 means its value of mark can
be applied for 4t
～
x5t truck(except W58)
;
When the mast is in the lowest place
：
The truck with standard mast demands filling
the hydraulic oil above the mark of ―70‖; the
truck with triplex mast demands filling the
hydraulic oil above the mark of ―74‖.
4.0t~5.5t W58 Forklift Truck:
1. L scale indicates the liquid level lower
limit. The level of truck with mast lower
than 4M (including 4M)(including full free
mast) should be higher than this scale.
2. M scale indicates high mast lower limit.
The liquid level of truck with mast over
than 4M(including duplex, free lift or
triplex mast) or with attachment should
be higher than this scale.
3. H scale indicates the hydraulic oil upper
limit, but truck with attachment is allowed
to over this limitation.
7. Brake fluid level check (1.0-X5.5t)
Check the fluid level in the brake fluid
reservoir. The level should be between the
two seams of the reservoir. When adding fluid,
due care should be taken to prevent air from
entering the brake tube.
Caution
When adding fluid, due care should be taken
to prevent dirt or water from entering the
reservoir.
Brake fluid is dangerous to health, you
should avoid skin contact.
Brake oil fluid change
See
― Every half year maintenance (1000
hours)‖
7. Head lamp check
Make sure that the head lamp is lighting when
the key is at ―ON‖ position.
8. Turn signal check
Make sure that the turn signal operates
properly by moving the turn signal lever
9. Hand brake check
①
Drive truck slowly
②
Pull
hand brake lever, stop the truck,
and truck has no deviation.
10. Back-up lamp and buzzer check
The back-up lamp comes on and buzzer
sounds when the shift lever is placed in
reverse position
.
11. Turning
①
Operate the truck running slowly.
②
Turn the steering wheel to left and
right 3 times respectively.
Check that the steering forces are equal in
right and left.
12. Horn
Press the horn button to make certain the
horn sound is normal or not.
13. Driver’s seat adjustment and safety
belt check
Make sure the driver‘s seat is properly
positioned. If not properly, shift the adjusting
lever and move the driver‘s seat to a position
which provides easy access to all foot and
hand controls.
Check if safety belt is normal.
14. Shift lever check
Inspect the shift lever to see if loose and shift
change is smooth.
15. Lifting lever, tilting lever and
attachment lever check
Check the loading levers (for lift, tilt and
optional attachment) for looseness and
smooth operation.
Increase the rotate speed of engine, make
certain that the lifting lever, tilting lever and
attachment lever is in good work condition.
16. Instruments and sensors
Make sure that hour meter, water temperature
indicator,
oil temperature indicator,
transmission fluid sensor, fuel sensor and
engine coolant temperature sensor, oil
pressure sensor etc., function properly.
17. Brake pedal and inching pedal check