69
LIFT METHOD
8.
Operate label
1
Hydraulic truck
BRAKE
INCHING
ACCELERATOR
9.
Nameplate label
10,11,12
:
Load curve label
It shows the connection among load center
position and max load, max lifting height.
Load capacity decreases if truck equips with
sideshifter and attachment, or lifting height
increases.
Before loading, please check whether the
load and load centre in the range of load
capacity chart. If the figure of load is complex,
please make sure the heaviest part of load is
in the centre of fork and close to backrest.
SUBTRACT 200kg WITH SIDESHIFTER
mm
LOAD CENTRE POSITION
kg
RATED LOAD WEIGHT
13.
Warning label
Do not load lift truck over capacity limit designated on the load chart.Do not lift unstable loads.
This lift truck is not designed for raising or transporting people.Do not use lift truck for those purposes under any
Before you get off lift truck,made sure the hand brake is set,lower forks or attachments,put forward/reverse lever
in neutral position and turn off key switch.Do not park on a slope.
circumstances.
Repair work should be done by authorized and trained persons only.
W A R N I N G
SERIOUS OR FATAL INJURY MAY RESULT TO YOURSELF OR OTHERS IF NOT FOLLOWED
This lift truck should not be operated by anyone who is not authorized and properly trained.
Read the Operators Manual and all warnings carefully,and make yourself familiar with your lift truck.
Inspect and check your lift truck daily before and after use.Do not operate faulty or damaged lift trucks.
To protect from falling objects,make sure that the Overhead Guard and Load Backrest Extension are correctly mounted
and in good condition.
Before starting engine,always set forward/reverse lever in neutral,with hand brake on .
Drive carefully,keeping forks and attachments as low as possible & fully tilted backp- Never Forward
Keep a careful lookout for people,obstructions and the path of travel.Watch clearance,especially overhead and tail
swing.Yield right of way to pedestrians.
Drive forward when you are climbing a slope with a load .Drive in reverse when you are descending with loads.Do not
Slow down before turning.Avoid any sudden start,stop or turning.Lateral tipover can occur if truck is improperly operated.
Do not stick hands,feel and other parts lf your body outside the Operators compartment.
Operator's Manual and Service Manual are supplied with this truck or available from our forklift truck dealers.
turn while on a slope.
14
.
Lubrication system label
15
.
No washing label
On the right
overhead guard, it's the air inlet passage of
the engine. It is strictly prohibited to let water
enter airshaft and avoid water during washing
the truck.
Содержание XF Series
Страница 127: ...123 pipes IMPCO single fuel system 120...
Страница 128: ...124 LPG system drawing...
Страница 141: ...137 XVI Maintenance record Date Item of maintenance Signature Remark...