HANGCHA XF Series Скачать руководство пользователя

Страница: 69 / 142

5. Lubrication system drawing

1. General motor lithium complex grease 2. Engine lubricating grease

3. Gear oil 4. Hydraulic oil
5. Torque converter oil 6. Brake oil

Note

：

1. The details of lubricating oil for different trucks are listed in the

Table for the oil

used in the truck.

2. Lubrication for mast,

please refer to Weekly Maintenance (40hrs)

Environment protection

：

1. Please perform truck cleaning and maintenance at specified locations.

2. Before removing the pipe, connector and related parts, please use the specified container for the

used liquid (include antifreeze liquid, engine oil, hydraulic oil, hydrodynamic power transmission oil,

gear oil, brake liquid, lubrication grease) and used battery.

The used liquid referred above should only be disposed of according to local environment

protection laws and regulations.

Safety awareness

：

The antifreeze liquid, engine oil, hydraulic oil, hydrodynamic power transmission oil and gear oil

should be replaced when it is below 70°C to avoid personal injury.

Содержание XF Series















































































































































Результаты поиска

Содержание XF Series

Отзывы:

Похожие инструкции для XF Series

Бренды по названию

Популярные бренды

HANGCHA XF Series, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание XF Series

Отзывы:

Похожие инструкции для XF Series

Бренды по названию

Популярные бренды