81
Configuration and operation
WLAN Router 300
g
Automatic WPS configuration
WPS (WiFi Protected Setup) is a function that simplifies the security
configuration of the wireless LAN connection.
NOTE
In order to be able to use the function, the router/access point
►
and the remote station (WLAN USB stick, PCI card or PCMCIA
card) must have the WPS function.
There are two ways of performing the security configuration:
Configuration with button
■
Configuration with pin code
■
Configuration with button
Press the Reset/WPS button
3
on the device.
Within 2 minutes, click button "PBC" under tab "WPS" in the
configuration program of the WLAN adapter.
Configuration with pin code
Note the pin code displayed in the configuration program of the
WLAN adapter.
Select the target network in the upper list and then click button
"PIN".
Switch to the user interface of the device and select
Setup →
Wireless→ WPS
.
Enter the noted code in the input field for the pin code and click
"Start PIN" to start the transmission. The connection is now set
up automatically.
After successful connection, a profile is created that automatically
sets up the connection again after a restart.
