68
Configuration and operation
WLAN Router 300
g
Wireless LAN settings
The settings for the wireless LAN are made here. To change the
standard WLAN settings, proceed as follows:
On the home page, click the button "General Setup" and then
select "Wireless" in the menu on the left.
Check "Enable".
Click "Apply" and in the next window click "Continue".
Basic settings
Select "Basic settings" in the menu on the left.
Under "Mode", select the function the device is to perform in the
network.
Mode
Comments
AP
If the device is the only access point in your
network, or no connection is to be made to
other access points at bridge level.
AP bridge
point to point
If you wish to make a wireless connection
between this access point and a second
access point. In this mode, clients do not
have the possibility to log in via a wireless
connection.
AP bridge
point to multi-point
If you wish to make a wireless connection
between this access point and several other
access points. In this mode, clients do not
have the possibility to log in via a wireless
connection.
AP bridge WDS
If you wish to make a wireless connection
between this access point and one or more
other access points and clients are to con
-
tinue to have the possibility of wireless login.
The further configuration is dependent on the selected mode.
