78
Configuration and operation
WLAN Router 300
g
Setting the encryption for bridge point to point, bridge
point to multi-point and bridge WDS
Proceed as follows:
On the home page, click the button "General Setup" and then
select "Wireless" in the menu on the left.
Under the basic settings, select the mode "AP bridge point to
point", "AP bridge point to multi-point" or "AP bridge WDS".
Then select "Security settings" in the menu on the left.
NOTE
For these operating modes you can carry out the setting of
►
the encryption at the end of the respective operating mode
settings by clicking the button "Security settings".
For WDS the encryption must be set beforehand in the
►
menu on the left under "Wireless/Security settings".
The following encryption methods are available:
WEP encryption with 64 bit and 128 bit
■
WPA PSK (Pre-Shared Key) encryption
■
WEP (Wired Equivalent Privacy) encryption
