66
Configuration and operation
WLAN Router 300
g
LAN settings
The settings for the cable-bound LAN are made here. To change the
standard LAN settings, proceed as follows:
On the home page, click the button "General Setup" and then
select "LAN" in the menu on the left.
LAN IP
Input field
Comments
IP address
The default IP address of the device is
192.168.2.1. If you wish to use a different
address, enter another IP address here.
Subnet mask
Enter the subnet mask here. Normally you
should enter
255.255.255.0
here.
DHCP server
Select "Activated" if the IP addresses in
your network are managed by a DHCP
server .
Select "Deactivated" if the IP addresses in
your network are assigned statically.
