HAKO Citymaster 2000, Инструкция по эксплуатации и обслуживанию

Страница: 43 / 186

X56b320.fm
3-15
Operation
Operation check list After starting the engine and during operation, check and observe the fol-
lowing points:
No
.
Question
1 Warning lights for engine oil pressure, alternator and coolant
level message gone off? ( 3-20)
2 Braking effect sufficient? ( 3-54)
3 Engine coolant in normal range? ( 3-20)
4 Is the steering working properly? ( 3-52)
5 Is anyone dangerously close to the vehicle? ( 2-1)
When travelling on public roads, particular attention should be paid
to the following points:
6 Press Hako key ( 3-61) (all functions of sweeping mode are
OFF)
7 If required, change over to front wheel steering ( 3-28)
8 Select riding mode (switch on transport ride mode) ( 3-31)
For workrides (sweeping operation)
1 Select riding mode (switch on work ride mode) ( 3-31)
2 Select steering mode ( 3-28)
3 Press Hako key ( 3-61)
4 Select brush speed ( 3-63), brush ground pressure ( 3-63),
fan speed ( 3-66) according to the degree of soiling encoun-
tered
5 Switch on the clear water pump supplying the spray nozzles at
the sweeping unit and select delivered water amount so as to
provide for optimal dust binding ( 3-63)
6 If required, switch on recirculatory water valve to the suction port
( 3-62)
7 Switch on rotating beacon and lighting if required ( 3-34)
Briefly interrupting the work ride mode:
1 Press Hako key ( 3-61)
2 Work ride mode interrupted
3 Press Hako key again to return to work ride mode (all functions
for sweeping operations are ON again