– 13 –
(
Continued next page
)
G
Smart Wash
(on some models)
When enabled, the
Smart Wash
option will automatically sense the soil level of the load
and adjust the wash cycle accordingly (adding or removing agitation and soaking times) to
achieve excellent wash performance while minimizing wear.
Smart Rinse
(on some models)
The
Smart Rinse
feature senses the amount of soil and detergent in the current laundry
cycle and determines whether additional water is needed to ensure a thorough rinse keeping
fabrics performing like new for longer.
My Cycle Settings
(on some models)
As the cycle selector knob is turned, the
Temp, Soil
and
Spin
settings change to automatic
pre-set default settings for each cycle. If a different default setting is desired, select the
desired options or changes to the cycle settings, then press and hold the
My Cycle
button for
3-seconds to store them.
The
My Cycle
button will light when active. In the future, when the selector knob is turned to
that cycle, the settings will be automatically recalled. To restore the factory defaults tempo-
rarily (i.e.: for this load), press the
My Cycle
button for 1/2-second. The
My Cycle
light will
turn off and the factory defaults will load. However, the next time this cycle is selected,
My
Cycle
settings will load.
If wished to permanently restore the factory default settings for the cycle; when the
My Cycle
is active (button light on) press and hold the
My Cycle
button for 3-seconds. The factory
defaults will load for the selected cycle and the
My Cycle
light will turn off. The default set
-
tings will load when this cycle is selected in the future and the
My Cycle
light will remain
off.
NOTE
: My Cycle saves the following options:
Temp, Soil, Spin, Extra Rinse, Deep Fill,
Auto Soak, Deep Rinse, Tangle Control, Auto, Power Clean and Gentle Care
.
Sound (on some models)
Use the
Volume
button to change the volume of the end of cycle signal and other system
tones. Press the button until the desired volume is reached (high, medium, low) or off. On
some models, this feature may only be available through the GE Appliances SmartHQ App.
Control Lock
Use the control lock before or during a cycle to prevent any selections from being made.
To
lock/unlock the washer controls
, press and hold the
Rinse
and
Spin
buttons for 3-sec-
onds. The control lock icon will light up when it is on.
NOTE
: The
Power
button can still be
used when the machine is locked.
Power Clean and Gentle Care (on some models)
The
Auto
setting balances wash performance, fabric care, and cycle time for normally soiled
or lightly soiled loads.
Gentle Care
reduces agitation time and adds a series of soaks to reduce fabric wear/fading
while still providing great wash performance on garments needing special care.
Use
Power Clean
to add heavy agitation and soaking to boost wash performance for loads
needing a deep clean.