HAI lumina, Руководство по продвинутым функциям

Страница: 33 / 116

Page 25
Unit Numbers
Lumina systems have 128 total Unit Numbers. They consist of HLC, UPB, CentraLite, RadioRA, ALC, Compose, and X-10
module unit numbers, hardwire voltage output unit numbers, and internal flag unit numbers as follows:
Lumina Unit Numbers
Module / Output Unit Numbers
1 - 16
HLC Room 1 and 2, UPB Unit ID 1-16, CentraLite loads 1-16, RadioRA Lighting Zones and
Master Controls 1-16, or X-10 modules 1 – 16 (House Code X)
17 - 32
HLC Room 3 and 4, UPB Unit ID 17-32, CentraLite loads 17-32, RadioRA Lighting Zones
and Master Controls 17-32, or X-10 modules 1 – 16 (House Code X+1)
(1 - 31) ALC addresses 1-31, Branch 1 *
33 - 48 HLC Room 5 and 6, UPB Unit ID 33-48, CentraLite loads 33-48, RadioRA Lighting Zones
and Master Controls 33-48, or X-10 modules 1 – 16 (House Code X+2)
49 - 64 HLC Room 7 and 8, UPB Unit ID 49-64, CentraLite loads 49-64, RadioRA Lighting Zones
and Master Controls 49-64, or X-10 modules 1 – 16 (House Code X+3)
(33 – 63) ALC addresses 1-31, Branch 2 *
65 - 72 Voltage Outputs (1-8)
73 Voltage Output labeled INT HORN
74 Voltage Output labeled EXT HORN
75 – 128 Internal Flags
“X” Represents the House Code setting on the Omni IIe Controller
“*” If used
Scrolling Through Names
The Lumina stores names for Units, Zones, Buttons, Codes, Temperatures, and Messages so that you don't have to remember that
"UNIT 5" is the "DEN LIGHT" and "ZONE 1" is the "FRONT DOOR". In general, any time you enter a unit, zone, button, code,
temperature, or message number, you can press the down arrow key to display its name, then use the up and down arrow keys to
scroll through the list of other names. This is true when entering commands and programming on the keypad. Only named items
are displayed on an OmniTouch touchscreen.
Controlling Units
The control menu is used when controlling lights and appliances. To enter the control menu, from the top-level display or from
the main menu, press the 1 (CTRL) key on the numeric keypad.
1=CONTROL 2=MODE
3=BUTTON 4=ALL
↓
Lumina will automatically display the first named item in that list. The down arrow key can then be used to scroll through the
list, and the ' # ' key is used to select the item. If the specific item number is known, enter the item number followed be the ' # '
key, or scroll up and down among the named items.
After the unit has been selected, press the ' # ' key. The keypad will display:
Controlling a Room of HLC Lighting
Living Room
0=OFF 1=ON 2-5=A-D
↓
Living Room
6=SET #=STA
↑