HAI lumina, Руководство по продвинутым функциям

Страница: 78 / 116

Page 70
Lumina Mode Commands
Press the 2 (MODE) key to set the Lumina mode –
See Mode . The following menu is displayed:
1=HOME 2=SLEEP
3=AWAY 4=VACATION
↓
5=PARTY 6=SPECIAL
↑
Select (1-6) to set the desired Lumina mode.
Program Button Commands
Select the 3 (BUTTON) key to program a macro button. Specify the macro button to be executed - See Button .
BUTTON:
ENTER BUTTON #=MENU
↓
Program All On / All Off Commands
Select the 4 (ALL) key to program All Lights On and All Units Off commands. It is also used to program Leviton Scene, UPB
Link, RadioRA Phantom Button, or CentraLite Scene commands –
See All .
ALL
0=OFF 1=ON 2=SCN 3=LINK
↓
ALL
4=PHANTOM 5=CENLIT
↑
Program Temperature Commands
Select the 5 (TEMP) key to control HAI Communicating Thermostats, energy saver modules, and temperature sensors. Specify
the desired command -
See Temperature.
TEMPERATURE:
ENTER TEMP ZONE 0=ALL
↓
Program Energy Cost
Select the 6 (ENERGY) key to set the current energy cost rate. Specify the desired energy cost rate:
ENERGY COST:
0=LO 1=MID 2=HI 3=CRIT
Program Message Commands
Select the 8 (MESSAGE) key to show, log, clear, say, phone, or send a message. Specify the desired command -
See Message.
MESSAGE
1=SHOW 2=LOG 3=CLEAR
↓
4=SAY 5=PHONE 6=SEND
↑
The 1 (SHOW) key allows you to display the selected text message(s) on the keypad's top-level display. This can be a helpful
reminder of special events and occasions.
The 2 (LOG) key allows you to store the selected text message(s) in the Event Log. This can be a helpful to keep track of the
times and dates of events and occurrences.
The 3 (CLEAR) key allows you to clear the selected text message, or all text messages from the keypad's display.