HAI lumina, Руководство по продвинутым функциям

Страница: 66 / 116

Page 58
SETUP
Configuration and Advanced Control Programming (ACP)
The Setup menu is used to configure operating parameters, program your system to do its automated control functions using ACP,
and give text and voice descriptions to all of your zones, units, buttons, codes, temperatures, and messages. To enter the Setup
menu, from the top-level display or from the main menu, press the 8 (SETUP) key on the numeric keypad.
9=SETUP
↑
Upon entry to the Setup mode, you will first be prompted to enter a Master code:
SET UP
ENTER CODE:
A Master Code is required to enter the Setup mode.
SET UP
1=CODES 2=TIME 3=PROG
↓
4=DIAL 5=AREA 6=MISC
7=NAMES 8=VOICE #=INST
↑
Set Up Codes
Lumina has 16 user codes that you may assign to users of the system. All Lumina codes are 4 digits in length (0001 to 9999).
Each user can be assigned a code with an authority level and times in which the code will be valid. To set up a code, from the
Setup menu, press the 1 (CODES) key. Use the arrow keys to scroll through the codes.
User Code 1 is always set to a Master code. The existing code number is not shown on the display. To change the code, enter a
four digit number, then press the ' # ' key.
Remember the code number. It will not be redisplayed.
CODE 2:
0000-9999 0000=DISABLE
Authority Level
Press the (
↓ ) key. You will then be prompted for an authority level for that code:
CODE 2 AUTHORITY: 3
1=MSTR 2=MGR 3=USER
1 = Master
Master codes have complete access to the entire system.
2 = Manager
Manager codes can access the Main Menu if the system is in High Security Mode and have telephone access privilege.
3 = User
User codes can only be used to change the Lumina mode in High Security mode.