HAI lumina, Руководство по продвинутым функциям

Страница: 72 / 116

Page 64
Button and Event Programs
Selecting 2 (BUTTON), from the "Edit When" menu, sets up a program to be activated when a macro button is executed or an
event occurs. The user is prompted to specify the button/event that activates the program:
BUTTON:
ENTER BUTTON #=MENU
↓
A specific macro button may be activated by entering the button number followed by the ' # ' key, or by using the arrow keys to
scroll through a list of buttons.
To program specific event buttons (i.e. Front Door Opens, Lumina Mode Changes, Porch Light Turns On, etc.), press the ' # ' key
to bring up a menu of event button types:
BUTTON TYPE
1=CTRL 2=MODE 3=ZONE
↓
4=ALL 5=ALARM 6=X-10
7=MISC 8=MSG 9=SWITCH
↑
After the event button is specified, the display returns to the
Edit Program menu.
Control Unit / Switch Press Event Buttons
This Event Button is activated upon the following:
•
When the specified Unit is turned on or off
•
When the top-rocker or bottom-rocker is pressed on a UPB, RadioRA, or ALC switch
•
When a button is pressed on a UPB 6-Button or 8-Button Keypad
•
When a button is pressed on a RadioRA Master Control
•
When a button is pressed on a ALC 4-Button Scene Switch Module
Press the 1 (CTRL) key to select the "When Command" for a control unit event.
UNIT:
ENTER UNIT
↓
The unit may be selected by entering the unit number followed by the ' # ' key or by using the arrow keys to scroll through a list of
unit names. Select the desired unit. Next, you are prompted to specify the event that activates the program:
WHEN Porch Light:
0=OFF 1=ON 2=SWITCH
Press the 0 (OFF) key to select when the unit turns off or press the 1 (ON) key to select when the unit turns on (this program is
executed whenever the unit is turned off or on).
Press the 2 (SWITCH) key to select only when the top-rocker or bottom-rocker is pressed at a UPB, RadioRA, or ALC Switch
(locally at the Switch) or when a button is pressed on a keypad.
SWITCH:
0=OFF 1=ON 2-11=SW1-SW10
Press "0" to select only when the bottom-rocker (off) is pressed on the Switch. Press "1" to select only when the top-rocker (on)
is pressed on the Switch. Press "2-9" (see the Corresponding Switch Table) to select when that button is pressed on a keypad.
Press the ' # ' key to enter your selection.