Page 73
Set Up Dial
The
Set Up Dial
menu is used to configure all of the telephone related items. To enter the
Set Up Dial
menu, from the Setup
menu, press the 4 (DIAL) key. Use the arrows to scroll through the items. For each item, the top line displays a description of
the item and its current setting. The bottom line shows the available ranges for your selections.
Phone numbers can be up to 24 characters long. The number is shown on the bottom line of the display. Press the HOME key to
enter a ' - ' into the number. Press the SPECIAL key to specify a pause of 2 seconds (shown as a "T" on the display). Press the
SLEEP key to enter a ' * ' symbol or AWAY key to enter a ' # ' symbol into the number. Enter a single ' - ' for no number.
Telephone Access
The
Telephone Access
item allows you to turn the local (in-house) and remote telephone control feature on and off.
If set to On, the Lumina will allow local and remote telephone access as described in Telephone Control. If set to Off, the
Lumina will not answer incoming calls ever, and will not work on the in house phones. Dial outs will still occur, and the system
will operate normally when the Lumina dials out.
If you do not have your Lumina connected to a phone line, set
Telephone Access
to Off to keep the system from displaying
"PHONE LINE DEAD". The default setting for
Telephone Access
is Off.
Answer Outside Call
If you do not want your system to
Answer Outside Call
, set this item to No. The local (in-house) telephone control features will
still work, but the system will never answer an incoming call.
The default setting for
Answer Outside Call
is Yes.
Remote Commands
The
Remote Commands Ok
item allows you to prevent any commands from being issued from a remote telephone.
If
Remote Commands Ok
is set to Yes, the Lumina will allow all commands to be executed when called from a remote telephone.
If
Remote Commands Ok
is set to No, then lights, appliances, and mode commands cannot be controlled from a remote telephone
that dials into your home.
You can issue commands from a local (in-house) phone with
Remote Commands Ok
set to Yes or No. The default setting is Yes.
Rings Before Answer
Your phone must ring this number of times before the Lumina will answer an incoming call to your phone.
To change
Rings Before Answer
, enter the new number from 1 to 15, then press the ' # ' key. The factory default setting is 8.
Dial Type
The
Dial Type
specifies the type of dialing used when the Lumina dials out. If you do not have Touch-Tone service, then
Dial
Type
must be set to Pulse.
The default
Dial Type
is Tone.
My Phone Number
My Phone Number
is the phone number that will be announced when the Lumina dials out in the event of an alarm. It should be
set to the phone number of the premises where your system is installed.
To enter phone numbers, press the keypad keys 0 - 9. You can put in a dash (-) for legibility by pressing the HOME key.
Press the ' # ' key after you have pressed all of the digits in the phone number. For example, to enter the number 555-1234, press
555 "HOME" 1234 #.
Содержание lumina
