HAI lumina, Руководство по продвинутым функциям

Страница: 98 / 116

Page 90
Set Up Address
The final setup item is accomplished over the telephone. This is the address that the system says when it dials out an alarm
condition Your voice will be recorded on computer chips in the Lumina controller and saved to be played back in the alarm
message when the system dials out.
Pick up an inside phone and press the ' # ' key on the telephone within 5 seconds of picking up the phone. The Lumina will
respond with a menu. Press 8 on the telephone keypad, then 8. The unit will say "ADDRESS IS:" then the Lumina will play back
the message stored in the Address memory if one has been entered by your installer.
To record your address, Press 9, then enter the Master Code. The Lumina will say "RECORD ADDRESS", and then BEEP. In a
normal tone of voice, say your name and address and any helpful information for locating your house.
"THE JONES RESIDENCE, 1234 JOHNSON STREET, CORNER OF JOHNSON AND THIRD STREET"
The unit will beep after 8 seconds, and then play the address back to you. If you are not happy with the sound, re-record by
pressing 9 and the Master Code. If you would like to hear the address again, press 8 for Play Address.
If you accidentally press 9 but have not entered your master code and do not wish to record a new address, simply hang up the
phone. The address can be recorded from a local (in house) phone or a remote phone. We suggest using a local phone for higher
sound quality.
¾ When the Lumina says "record address - beep" any previous address recorded on your system is erased. Always verify
that you have your name and address in your system if you have entered this function.
¾ When recording the address, do not press any touch-tone keys on your phone until the second beep, indicating that
recording is complete. This will cause improper operation when the system dials out. The Lumina will think that the
tone is a code being entered by the called party and it will stop talking.