HAI lumina, Руководство по продвинутым функциям

Страница: 86 / 116

Page 78
It is not necessary to alter the time zone to compensate for daylight savings time, the Lumina will automatically adjust its
calculations for sunrise and sunset, and time when daylight savings time begins and ends.
LATITUDE: 30
0-60
LATITUDE N/S: 1
1=NORTH 2=SOUTH
LONGITUDE: 90
0-180
LONGITUDE E/W: 2
1=EAST 2=WEST
TIME ZONE: 6
0-12
↑
Daylight Savings
The Lumina automatically calculates the day of daylight savings time each year. It also adjusts the "time of day" each time
daylight savings time begins and ends.
To enable the system to properly calculate daylight savings time, a start month, start weekend, end month, and end weekend is
set-up at the factory. You may change or disable this function if desired.
DST START MONTH: 4
1-12 0=DISABLE
DST START WEEKEND:
FIRST SUNDAY #=CHNG
DST END MONTH: 10
1-12 0=DISABLE
DST END WEEKEND:
LAST SUNDAY #=CHNG
↑
Set the value for DST Start and End Months to "0" if Daylight Savings Time does not apply to your region, or to disable this
automatic time update feature.
The DST Start and End Weekend takes place on the specified Sunday (1-7) at 2:00 AM.
To change the DST Start or End Weekend, press the ' # ' key, then use the arrow keys to scroll through the list. Press the ' # ' key
to make the new selection
.
NUMBER DESCRIPTION
1 First
Sunday
2 Second Sunday
3 Third Sunday
4 Fourth Sunday
5 Last Sunday
6 Next to Last Sunday
7 Third from Last Sunday