HAI lumina, Руководство по продвинутым функциям

Страница: 89 / 116

Page 81
Delete a Name
To delete an existing name, use the up arrow (
↑ ) and down arrow ( ↓ ) keys to scroll through the list of existing names. When the
item name or number appears that you wish to delete, press the ' # ' key:
UNIT 7: Table Lamp
00-95 #=LIST
↓
Press the ' # ' key to display a list of names that are stored in the controller. The first name is actually blank:
UNIT 7: Table Lamp
↓
Press the ' # ' key to delete the name.
Note: To delete an existing name for a code or message, scroll through the list of existing names. When the existing name or
number appears that you wish to delete, press 0 0 ↑ #.
Set Up Voice
The Lumina can be set up to speak descriptive names such as "FRONT DOOR" for control zones, units, buttons, codes,
temperatures, and messages. These names will be spoken over the telephone along with the item number that is normally spoken.
Voice descriptions for messages can be spoken over a speaker when used with a Two-Way Audio Module.
To enter the
Set Up Voice menu, from the Setup menu, press the 8 (VOICE) key.
SET UP VOICE
1=CTRL 2=ZONE 3=BTTN
↓
4=CODE 5=TEMP 8=MSG
↑
Select the item that you would like to give a voice description. Use the arrow keys to scroll through the list of names.
Note: When the Quick-Set Name feature is used, it also assigns each item a voice description. The voice description can be
changes as desired.
To enter or change a voice description, enter the code shown next to the voice description in Appendix D for each description
(word or group of words), then press the ' # ' key. After you have entered the complete description for each item (unit, zone,
button, code, temperature, and message), press the ' # ' key twice. You may enter up to six (6) descriptions (word or group of
words) for each unit, zone, button, code, temperature, and message.
UNIT 1 VOICE:
↓
UNIT 1 VOICE:
144 109
↓
When Unit 1 is spoken over the phone, the Lumina will say, "UNIT 1 - PORCH LIGHT".