background image

 

PAN15-1 

Smart energy plug in switch

 

     

 

 

 

 

 

 

 

 

This  plug-in  ON/OFF  switch  PAN15 is  a  security  enabled  wireless  switch, based  on 
Z-Wave  Plus  technology.  Z-Wave  Plus

TM

  enabled  devices  displaying  the  Z-Wave 

Plus

TM

 logo can also be used with it regardless of the manufacturer, and can also be 

used in other manufacturer’s Z-Wave

TM

 enabled networks. Remote On/Off control of 

the  connected  load  is  possible  with  other  manufacturer’s  wireless  Controller.  Each 
switch  is  designed  to  act  as  a  repeater.  Repeaters  will  re-transmit  the  RF  signal  to 
ensure  that  the  signal  is  received  by  its  intended  destination  by  routing  the  signal 
around  obstacles  and  radio  dead  spots.  Because  PAN15  supports  Security 
Command Class, it can learn with Secured controller. Its functionality and supported 
command classes is identical when included as a secure and non-secure device. 
 
This  plug-in  ON/OFF  switch  is  able  to  detect  instance  wattage  (1560W/UL/TW/JP) 
and  overload  current  (14.5A)  of  connected  lights  or  appliances. 

When  detecting 

overload  state,  the  Switch  will  be  disabled  and  its  On/Off  button  will  be  lockout  of 
which LED will flash quickly.  However, unplug and re-connect the switch will reset its 
overload condition to normal status. 
 

Adding to Z-Wave

TM

 Network

 

 
In  the  front  casing,  there  is  an  On/Off  button  with  LED  indicator  which  is  used  to 

toggle switch on and off or carry out inclusion, exclusion, reset or association. When 
first  power  is  applied,  its  LED  flashes  on  and  off  alternately  and  repeatedly  at  0.5 
second  intervals.  It  implies  that  it  has  not  been  assigned  a  node  ID  and  start  auto 
inclusion.  
 

Auto Inclusion

 

 
The function of auto inclusion will be executed as long as the switch does not have 
Node ID and just plug the switch into a wall outlet.

 

 
Note:

 Auto inclusion timeout is 2 minute during which the node information of 

explorer frame will be emitted once several seconds. Unlike “inclusion” function as 
shown in the table below, the execution of auto inclusion is free from pressing the 
On/Off button on the Switch. 
 
The table below lists an operation summary of basic Z-Wave functions. Please refer 
to the instructions for your Z-Wave

TM

 Certificated Primary Controller to access the 

Setup function, and to 

Add/Remove

/associate devices 

 

Function

 

Description

 

Annotation

 

No node ID

 

The Z-Wave Controller does not allocate 
a node ID to the Switch.

 

LED 2-second on, 2-second 
off

 

Add

 

1.Put your Z-Wave controller into  

inclusion mode by following the  
instructions provided by the  
controller manufacturer. 

 

 

2. Pressing On/Off button three times 

 within 2 seconds will enter inclusion  

mode.

 

Remove

 

1.Put your Z-Wave controller into  

exclusion mode by following the  
instructions provided by the  
controller manufacturer.

 

 

1.

 

Pressing On/Off button three times 
within 2 seconds will enter exclusion 
mode.

 

Node ID has been excluded.

 

LED 0.5s On, 0.5s Off (Enter 
auto inclusion)

 

Содержание PAN15-1









Отзывы: