Haas TL Series, Руководство по обучению

Страница: 14 / 111

Productivity Inc – Haas CNC TL Series Lathe Operator Manual Page 12
1 – Function Keys
F1 – F4
– Perform different functions depending on which mode the machine is in. Example in offsets
mode F1 will directly enter value given it into offset geometry.
X DIAMETER MEASURE
– Will take machine X position ask for a diameter measurement on the part
which tool turned and put correct X Geometry in Tool Offsets page.
NEXT TOOL
– In set up this will select the next tool and make a tool index.
X/Z
- Toggles between X-axis and Z-axis jog modes during a set up.
Z FACE MEASURE –
Used to record Z tool offsets and Z work offsets.
2 – Jog Keys
Chip FWD
(Chip Conveyer Forward) – Turns the chip conveyer in a direction that removes chips from the
work cell.
Chip STOP
(Chip Auger Stop) – Stops chip conveyer movement.
Chip REV
(Chip Auger Reverse) – Turns the chip conveyer in reverse.
<-TS
– Moves tailstock toward the spindle.
TS Rapid –
Increases speed of tailstock movement when used concurrently with the other TS keys.
->TS -
Moves tailstock away from spindle.
+X, -X
(Axis) Selects the X axis for continuous motion when depressed.
+Z, -Z
(Axis) Selects the Z axis for continuous motion when depressed.
Rapid –
When pressed simultaneously with X or Z keys will move at maximum jog speed.